Basic-ddns

From Tomato64
Revision as of 15:59, 26 September 2023 by Lancethepants (talk | contribs) (Created page with "<span id="ddns"></span> = DDNS = Dynamic DNS is a function that allows you to have a private domain linked to a dynamic IP address. Periodically, as the IP address changes, a client module updates the binding between the domain name and IP address. In simple terms, Dynamic DNS allows you to have your own domain (or subdomain), and keep track of its IP address on a regular basis. This allows you to access your network device and its services from anywhere on the Interne...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

DDNS

Dynamic DNS is a function that allows you to have a private domain linked to a dynamic IP address. Periodically, as the IP address changes, a client module updates the binding between the domain name and IP address. In simple terms, Dynamic DNS allows you to have your own domain (or subdomain), and keep track of its IP address on a regular basis.

This allows you to access your network device and its services from anywhere on the Internet, since you never have to know your device's (changing) IP address. FreshTomato includes built-in DDNS clients for the most common DDNS providers.


Dynamic DNS Client

pasted:20220106-204411.png


IP Address: From this dropdwn, you select which IP address to bind to the domain address.

  • Use WAN0 IP Address (YourWAN0Address) *
    • This is the default, but you can choose from any custom choice below.
  • Use WAN1 IP Address (Your WAN1Address)
  • Use WAN2 IP Address (YourWAN2Address)
  • Use WAN3 IP Address (Your WAN3Address)
  • Use External IP Address Checker
    • This is helpful If your device has no public IP address.

When selected, this runs every 10 minutes.

  • Offline 0.0.0.0
    • This sets the domain unreachable and points it to IP address 0.0.0.0
  • Offline 10.1.1.1
    • This sets the domain unreachable and points it to IP address 10.1.1.1
  • Custom IP
    • Here, you can set any DDNS domain you wish.
    • However, this method is not dynamic.



    • Auto refresh every: **This sets how often the domain-to-IP mapping will be reconfirmed, even if the address hasn't changed.

You can configure up to two different DDNS domains. However, they will both be mapped to the same IP address, as defined above.

Dynamic DNS 1

20220106-204836.png


    • Service: **This specifies the name of the first built-in DDNS provider FreshTomato will use. If your provider isn't listed, you can try the Custom URL option. Most providers allow you to update the mapping IP, calling a specific URL linked to your account. Check with your DDNS provider for details on how to use the Custom URL. You can also try using DNS-O-MATIC, or simply changing providers.

URL: This specifies the address of the first DDNS provider. Depending on which Provider is selected, different fields will appear.

These may include:

  • Username
  • Email address
  • Password
  • Token/
  • Hostname
  • MX
  • Wildcard
  • Save state when IP changes

Force next update: Enabling this triggers an update immediately after you click Save. Use this with caution, as some providers limit how often you can perform updates. Updating too frequently to your domain/account mapping might get you temporarily blocked.

Last IP Address: This displays the last IP address that the DDNS client used to send the update.

Last result: This performs a basic diagnostic to verify your configuration is working properly. Since you can map only one IP address, this page is currently not MultiWAN-aware.

Dynamic DNS 2

Service: identifies the second built-in DDNS provider to be used. If your provider isn't listed, you might try the Custom URL.Other options include trying DNS-O-MATIC or simply changing providers.

URL: is the address of the second DDNS provider, for better identification. Based on the Provider selected, you will see different fields, like username/password/token/hostname etcetera.

Force next update: This triggers an update as soon as you click Save. Note that some providers have a limitation on how many updates you can perform in a given period. If you perform too many updates your domain/account might get temporarily blocked.

Last IP Address: Provides you with the last IP address the second DDNS client used to send the update.

Last result: Performs a basic diagnostic to indicate if your configuration/account are correct. Since you can map only one IP address, this page is currently not MultiWAN-aware.