All public logs

Combined display of all available logs of Tomato64. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

16:11, 26 September 2023 Lancethepants talk contribs created page Advanced-wireless (Created page with " = Advanced Wireless = The Advanced Wireless menu contains settings for advanced tuning of WiFi interfaces. Changing settings from defaults is not recommended unless you are experienced with advanced WiFi settings. Default dropdown settings are noted with an asterisk (*). For basic WiFi settings, see the the Network menu wiki page. 20220309-082430.png <br...")
16:10, 26 September 2023 Lancethepants talk contribs created page Advanced-wlanvifs (Created page with " = Virtual Wireless = The Virtual Wireless menu allows you to create and modify virtual wireless interfaces for virtual wireless networks. This is useful for creating things like guest networks, (for questionable/unfamiliar users). It's also useful for creating separate networks for IoT (Internet of Things) devices. IoT devices are often untrusted in terms of security. == Virtual Wireless...")
16:10, 26 September 2023 Lancethepants talk contribs created page Advanced-access (Created page with " = LAN Access = This page allows you to define LAN-to-LAN traffic where it otherwise would be blocked. For example, let's say we have two LANs, one primary (LAN0/br0) and one secondary (LAN1/br1). If you want devices on LAN0 to be able to communicate with devices on LAN1 (and vice versa), you might use these settings: 20220126-183839.png '''On:''' Checking this enables the ru...")
16:09, 26 September 2023 Lancethepants talk contribs created page Advanced-vlan (Created page with " = VLAN (IEEE 802.1Q) = FreshTomato supports VLAN (Virtual LAN) configurations which conform to the 802.1Q standard. The user can create up to 16 VLANs. A VLAN can use a VID between 1 and 4094. Please use FreshTomato 2021.8 and newer to make VLANs work properly on ALL ARM and MIPS router. (See examples below.) == VLAN Ethernet (Basic Configuration Information) ==...")
16:06, 26 September 2023 Lancethepants talk contribs created page Advanced-tor (Created page with " = TOR = == What is Tor? == Tor ("The Onion Router") is a security protocol used to increase the anonymity of Internet traffic. Tor's "Onion" routing is implemented at the application layer of the OSI model of the network stack. The TOR network is run as a free, worldwide, volunteer-run overlay network consisting of more than seven thousand relays. When you use the Tor browser, the Tor network do...")
16:06, 26 September 2023 Lancethepants talk contribs created page Advanced-pbr (Created page with " == MultiWAN Routing == While somewhat similar to the Routing menu, the MultiWAN Routing menu allows you to direct outbound traffic in multiwan scenarios. This menu lets you define advanced parameters to make a connection bind to a specific WAN. Where outbound traffic is directed will implicitly affect the corresponding (inbound) return traffic. A packet going to WAN0 should return only via the same interface. </span...")
16:05, 26 September 2023 Lancethepants talk contribs created page Advanced-routing (Created page with " == Routing == The Routing page allows you to view the current routing table. It also allows you to define the output interface for specific routing destinations (both IP addresses and Subnets). 20220110-191350.png The Current Routing Table displays the output from the <code>route</code> system command. A default table entry should be present that indicates traffic going towards the Internet...")
16:04, 26 September 2023 Lancethepants talk contribs created page Advanced-misc (Created page with " = Miscellaneous = In this menu, you can tweak some secondary, less critical settings. These settings rarely need to be modified. If you change them, make sure you understand the consequences of the changes. '''Boot Wait Time * :''' This is the time period during which the router can be accessed using the included CFE webserver. This refers to the bootstrap portion of the process, or the loading of code before the Operating system...")
16:04, 26 September 2023 Lancethepants talk contribs created page Advanced-mac (Created page with " = MAC Address = The MAC Address menu has settings to let you electronically change (or "spoof") the MAC (Media Access Control) Address of various network interfaces. This function does '''not''' change the factory-assigned MAC Address in the device's chip. It just overlays a different address in software. A MAC address is called a Universally Administered Address (UAA) when it's set by the manufacturer or a locally-administered...")
16:03, 26 September 2023 Lancethepants talk contribs created page Advanced-adblock (Created page with " = Adblock = This menu contains settings to configure FreshTomato's ad blocker. It is strongly advised that you read the '''How Adblock Works''' section to understand its functioning, even if you use v2. In documentation, the function/menu will be spelled capitalized ("Adblock"). The actual script will be spelled "adblock", in lower case. == v1 and v2 == There are currently two versions...")
16:02, 26 September 2023 Lancethepants talk contribs created page Advanced-firewall (Created page with " = Firewall = The Firewall page allows you to configure options to protect or facilitate various types of network communications. == Firewall == 20220118-182859.png **WAN interfaces respond to ping and traceroute: **If enabled, this allows your device to reply to ICMP ping and traceroute request packets from Internet hosts. This is necessary for //ping //and //tr...")
16:01, 26 September 2023 Lancethepants talk contribs created page Advanced-dhcpdns (Created page with " = DHCP/DNS/TFTP = The DHCP/DNS/TFTP menu allows you to configure advanced settings for the DHCP, DNS and TFTP services for both the LAN and WAN. Most of this functionality is provided by [https://thekelleys.org.uk/ dnsmasq]. == DHCP Client (WAN) == The DHCP Client (WAN) section includes a ''dhcpc'' (dhcp client) options field. Here you can set parameters for your router's DHCP client. File:/pa...")
16:01, 26 September 2023 Lancethepants talk contribs created page Advanced-ctnf (Created page with " = Conntrack / Netfilter = The settings in this menu allow you to control some advanced network parameters. In most cases, the default settings are fine. Think very carefully before changing the settings from their defaults. You are advised to change these settings only if you have advanced networking knowledge and/or experience. == Connections == The Connections menu contains some limited conntrack...")
16:00, 26 September 2023 Lancethepants talk contribs created page Basic-wfilter (Created page with " = Wireless Filter = The Wireless Filter menu allows you to specify the MAC addresses of the only devices that will be allowed to connect on wireless interfaces. It is effectively a MAC Address whitelist for wireless access. (Default: Disabled). '''MAC Address:''' Enter the 12-character MAC address of the client device you wish to allow access to the wireless network. Clicking Add will create a new row in the table in which you...")
15:59, 26 September 2023 Lancethepants talk contribs created page Basic-static (Created page with " = DHCP Reservation = The DHCP Reservation menu contains settings to configure DHCP Reservations, Static ARP bindings and enable/disable IP Traffic monitoring for clients with the above mappings. == DHCP Reservation == Since release 2020.8, what was called "Static DHCP" is now more accurately named "DHCP Reservation". Please see "Inconsistent Terminology" in this sec...")
15:59, 26 September 2023 Lancethepants talk contribs created page Basic-ddns (Created page with " = DDNS = Dynamic DNS is a function that allows you to have a private domain linked to a dynamic IP address. Periodically, as the IP address changes, a client module updates the binding between the domain name and IP address. In simple terms, Dynamic DNS allows you to have your own domain (or subdomain), and keep track of its IP address on a regular basis. This allows you to access your network device and its services from anywhere on the Interne...")
15:57, 26 September 2023 Lancethepants talk contribs created page Basic-time (Created page with " = Time = The** **Time page displays and allows configuration of various time, time zone and NTP (Network Time Protocol) settings. '''Router Time:''' displays the router's current date, time and time zone. These are expressed as offset from UTC (Universal Time Coordinated) standard. **Time Zone: **This allows you to select in which time zone your FreshTomato hardware resides. '''Auto Daylight Savings Time''' * Enabled: * FreshTomato aut...")
15:14, 26 September 2023 Lancethepants talk contribs created page Basic-ident (Created page with " = Identification = The Identification page allows you to specify various name parameters for your FreshTomato device. '''Router Name''': Here, enter a nickname for the FreshTomato device for your own reference. The router name will display on the Overview page and in the title of the router's web interface pages. This is '''''not''''' a TCP/IP hostname. It does not register the device or help resolve it on the network. The ''ho...")
14:54, 26 September 2023 Lancethepants talk contribs created page Basic-ipv6 (Created page with " = IPv6 = The IPv6 menu contains setttings for configuring basic IPv6 functionality on FreshTomato. == IPv6 Service Type == IPv6 has a number of services, or modes of operation which it can use. Some partly depend on IPv4 services, and others are run entirely independent of IPv4. Please ask your Provider or search the Web to learn which IPv6 service type is used on your ISP's network. Currently, FreshTomato...")
14:51, 26 September 2023 Lancethepants talk contribs created page Basic-network (Created page with " = Network = The Network page includes most basic settings needed to configure the network. It is divided into sections including MultiWAN, WAN Settings, Ethernet Ports Configuration, LAN and Wireless setttings. == MultiWAN == 20220318-155543.png '''Number of WAN ports''': This lets you select the number of WAN ports to be used on the device. On routers with only one ph...")
14:50, 26 September 2023 Lancethepants talk contribs created page Tools-iperf (Created page with " = iPerf = '''IPerf''' is a tool that allows you to measure and tune network performance. IPerf can be run in client mode or server mode. Generally, client mode is used. iPerf requires you to know of a reliable public server with which you can use it. Currently, the official IPerf webpage hosts a short list of public iPerf servers: https://iperf.fr/iperf-servers.php. Some iPerf servers don't work, so if you receive an error when testing, try a...")
14:49, 26 September 2023 Lancethepants talk contribs created page Tools-wol (Created page with " = Wake on LAN = This function allows you a send a Wake-on-LAN signal (or "magic packet") to wired network devices to wake them or power them on. Wake on LAN is generally not supported by wireless devices. The list of devices on this menu includes: * Devices already active in the ARP table. * Devices defined in a static DHCP assignment. * Devices defined manually in the ''Dnsmaq Custom configuration'' field in the advanced-dhc...")
14:49, 26 September 2023 Lancethepants talk contribs created page Tools-qr (Created page with " == WiFi QR Codes == Starting in release 2021.6, this menu makes it easy to produce and print QR codes to identify your WiFi network to client devices. Modern devices can connect to WiFi by simply pointing the camera at a QR code. The QR code contains the information needed to establish the connection, including SSID and password. This can be useful in venues like Internet cafes, hostels/hotels, or even at house parties. Basically, it's u...")
14:48, 26 September 2023 Lancethepants talk contribs created page Tools-survey (Created page with " = Wireless Survey = This function lets you run a scan to detect WiFi networks nearby/detectable by your router. The results show: * Date and time the network was last detected * SSID name * BSSID * Relative Signal strength * Signal Quality * Channel (incl. band and sideband width) * Security method in use * Rates (actually 802.11 protocol in use) This information can help you decide which channels might be optimal for your own WiFi...")
14:47, 26 September 2023 Lancethepants talk contribs created page Tools-shell (Created page with " = System Commands = This page provides interactive access to FreshTomato's internal command shell from within the graphical web interface. It is limited in functionality, but can be handy if you want to perform a simple operation (like restarting a service). It's also useful when you are unable to access the device directly via remote protocols like ssh or telnet. An important note for users not familiar with Linux: Any command run i...")
14:46, 26 September 2023 Lancethepants talk contribs created page Tools-trace (Created page with " = Traceroute = This page provides a traceroute function from within the Web interface. Traceroute allows you to trace the route between the FreshTomato device and another device on a network or the Internet, helping you verify optimal paths and locate potential traffic bottlenecks or blockages. '''Address:''' Here, specify the domain name or IP address you wish to trace. '''Maximum Hops:''' Here, enter the maximum number of hops (T...")
14:46, 26 September 2023 Lancethepants talk contribs created page Tools-ping (Created page with " = Ping = The Ping page provides a ping function within the graphical Web interface. Ping allows you to send ICMP echo request messages to see if they are returned back. This allows you to test connectivity to another IP address directly from the router. '''Address:''' Here, specify the domain name or IP address you wish to ping. '''Ping Count:''' Here, enter the number of ICMP echo request packets you wish to send to the address. '''Packe...")
14:45, 26 September 2023 Lancethepants talk contribs created page Ipt-monthly (Created page with " = IP Traffic - Monthly = The IP Traffic - Monthly menu shows, in detail, the monthly bandwidth usage history per IP address. The table can be sorted in increments or decrements by [re]clicking on the header of your choice. If hostnames are shown, the host column will be sorted alphabetically. The last line of the table show the total usage of the host listed on that line. [https://wiki.freshtomato.org/lib/exe/detail.php?i...")
14:44, 26 September 2023 Lancethepants talk contribs created page Ipt-daily (Created page with " = IP Traffic - Daily = The IP Trafifc - Daily menu shows, in detail, daily bandwidth usage history per IP address. Clicking on/reclicking any column header will sort the table in increments or decrements. If hostnames are shown, the host column will be sorted alphabetically. The last line of the table show the total usage of the host listed on that line. [https://wiki.freshtomato.org/lib/exe/detail.php?id=overview&media=pas...")
14:44, 26 September 2023 Lancethepants talk contribs created page Ipt-details (Created page with " = IP Traffic - Transfer Rates = The IP Traffic - Transfer Rates menu displays detailed IP Transfer Rate data for each client IP address. The Transfer Rates section displays a table of detailed client transfer rate data, categorized in various ways. The Options section contains the configuration settings for the IP Traffic - Transfer Rates table. == IP Traffic - Transfer Rat...")
14:40, 26 September 2023 Lancethepants talk contribs created page Ipt-graphs (Created page with " = IP Traffic - View Graphs = The IP Traffic - View Graphs page displays pie charts of bandwidth used for each IP address. Each address's bandwidth is displayed in a different colour on the chart. Each chart sorts connections based on certain criteria. For each section on this page, there is a corresponding table with more information. == Connections Distribution (TCP/UDP) ==...")
14:38, 26 September 2023 Lancethepants talk contribs created page Ipt-realtime (Created page with " = IP Traffic - Real-time = The IP Traffic - Real-Time menu displays real-time bandwidth being used on ''selected network IP addresses/ranges''. Do not confuse this with with the ''Bandwidth''/Real-Time function, which collects bandwidth usage based on ''a specific FreshTomato interface''. '''IPs currently on graphic:''' This lets you select the IP addresses/ranges whose bandwidth data you wish to displa...")
14:37, 26 September 2023 Lancethepants talk contribs created page Bwm-monthly (Created page with " = Bandwidth - Monthly = The Bandwidth - Monthly menu displays bandwidth volume over a one-month period. This starts the first day at 00:00:00 and ends the last day at 23:59:59. The display is split into Download, Upload and Total (combined) volumes. NOTE: in MultiWAN configurations, FreshTomato will display only traffic on the primary WAN. '''Date''': This lets you select the way dates will be formatted in the...")
14:37, 26 September 2023 Lancethepants talk contribs created page Bwm-weekly (Created page with " = Bandwidth Monitor - Weekly = The Bandwidth //- //Weekly menu displays the amount of data transferred weekly through the WAN interface. The data are divided into Download, Upload and Total (combined) volumes. Please note that in MultiWAN configurations, FreshTomato will display only traffic on the primary WAN. '''Show''': * Summary - The table will display only a total weekly volume. * Full - The table will displa...")
14:36, 26 September 2023 Lancethepants talk contribs created page Bwm-daily (Created page with " = Bandwidth Monitor - Daily = The Bandwidth - Daily menu displays daily traffic flowing across the WAN interface, from 00:00:00 AM to 23:59:59 PM each day. Traffic is organized into Download, Upload, and Total (combined) columns. '''Date''': This lets you select the preferred date display format. '''Scale''': This defines the scale to be used in the reporting. The choices include: * KB - Data are displayed in KB. *...")
14:35, 26 September 2023 Lancethepants talk contribs created page Bwm-24 (Created page with " = Bandwidth - Last 24 Hours = The Bandwidth - Last 24 Hours menu displays bandwidth usage from the last 24 hours. The time window is 24 hours and the data resolution is 2 minutes. This means it displays a maximum of 24 hours of data which is sampled a maximum of every 2 minutes. '''Hours:''' This changes the time period of the graph data displayed. '''Avg.''' Applies a percentile display. This can show how a data point com...")
14:35, 26 September 2023 Lancethepants talk contribs created page Ipt-24 (Created page with " = Bandwidth - Last 24 Hours = The Bandwidth - Last 24 Hours menu displays bandwidth usage from the last 24 hours. The time window is 24 hours and the data resolution is 2 minutes. This means it displays a maximum of 24 hours of data which is sampled a maximum of every 2 minutes. '''Hours:''' This changes the time period of the graph data displayed. '''Avg.''' Applies a percentile display. This can show how a data point com...")
14:30, 26 September 2023 Lancethepants talk contribs created page Bwm-realtime (Created page with " = Bandwidth - Real-Time = The Bandwidth - Real-Time menu provides live monitoring of any router interface in graph form. Data are reset when the page first loads<ref> Although there is not data to "reset" when page first loads, it is reset on each subsequent [re]loads </ref>, and the display draws gradually. The maximum display window is 10 minutes, and data resolution is 2 seconds. That means 10 minutes of data can be...")
14:27, 26 September 2023 Lancethepants talk contribs created page Status-log (Created page with "====== Logs ====== This menu allows you to view the **last 25/50/100** lines in FreshTomato's system log, or even the entire contents of the log file** (View All)**.\\ The size of **All** is based on the Logging setting you manually configure.(( The size of the log (file size) is determined by your uptime (how long your system has been creating log entries). Logging configuration determines **maximum** size. )) \\ \\ {{:pasted:20230125-171422.png}} \\ \\ \\ Cli...")
14:26, 26 September 2023 Lancethepants talk contribs created page Status-webmon (Created page with " = Web Usage = This page allows you to enable Web Usage monitoring between the LAN and the Internet. It is recommended you leave it Disabled unless you have concerns about Web browsing patterns. For example, if you have the need to monitor abusive Web usage patterns, to supervise a minor's browsing habits, or just a need to gather statistics. (Default Disabled). From the 2020.6 release, the web monitor also works for secure (https) websites.<...")
14:18, 26 September 2023 Lancethepants talk contribs created page Status-devices (Created page with " = Device List = The Device List menu displays an overall view of the devices connected to your LAN. This information is gathered from a number of different sources including DHCP leases, ARP tables, and WiFi clients. 20210805-071313.png '''Interface:''' shows the interface on which the router sees the device. Since release 2021.3, this includes physical and logical interface...")
14:16, 26 September 2023 Lancethepants talk contribs created page Documentation (Created page with " = FreshTomato Interface = == Status == Overview Device List Web Usage Logs == Bandwidth == Real-Time Last 24 Hours Daily Weekly Monthly == IP Traffic == i...") Tag: Visual edit: Switched
13:46, 26 September 2023 Lancethepants talk contribs created page MediaWiki:Sidebar (Created page with " * navigation ** mainpage|mainpage-description *** status-update-url|Status-update ** recentchanges-url|recentchanges ** randompage-url|randompage ** helppage|help-mediawiki * SEARCH * TOOLBOX * LANGUAGES")
13:40, 26 September 2023 Lancethepants talk contribs deleted page File:20200520-145618.png
13:31, 26 September 2023 Lancethepants talk contribs undeleted page File:20200520-145618.png (1 revision and 1 file)
13:22, 26 September 2023 Lancethepants talk contribs deleted page File:20200520-145618.png
13:17, 26 September 2023 Lancethepants talk contribs created page File:20200520-145618.png
13:17, 26 September 2023 Lancethepants talk contribs uploaded File:20200520-145618.png
13:16, 26 September 2023 Lancethepants talk contribs created page Status-overview (Created page with " = Overview = This page summarizes data needed to verify status, basic configuration settings and hardware specifications. The Overview page is split into sections including System, Ethernet Ports State, WAN, LAN and Wireless. == System == This section displays hardware specifications and resource usage and information. [https://wiki.freshtomato.org/lib/exe/detail.php?id=overview&media=past...") Tag: Visual edit: Switched
16:49, 25 September 2023 MediaWiki default talk contribs created page Main Page

Anonymous

Search

All public logs

Namespaces

More

Page actions

Navigation

Navigation

Wiki tools

Wiki tools

Anonymous

Search

All public logs

Navigation

Wiki tools

Page tools